Petroleum Oil Production and Petroleum vs Synthetic Motor Oil

Comparing Synthetic Oil vs Conventional Oil

If you read the first two installments of Lube Notes, you have probably come to realize that I am gradually equipping you to evaluate lubricating products including a comparison between synthetic oil vs conventional oil. I am convinced that understanding some basic principles of lubrication can free us from believing everything that we read or hear. In this issue, I will briefly explain how petroleum oils are refined, introduce synthetic base oils and explain motor oil’s classification system used to assign quality levels to finished base stocks.

Petroleum Oil

Crude oil, truly today’s black gold, comes from nature as a dirty blend of hydrocarbons and contaminants of every kind. The job of the refinery (see figures one (page 17) and two (page 18)) is to clean this mixture and then crack it into various fractions for specific use. Crude oil typically comes with inorganic salt crystals and water mixed into the oil. It is necessary to remove this salt and water. This removal is accomplished by adding even more water and then allowing the crude mixture to settle. The oil is then heated by a large furnace until it becomes part semi-fluid and part vapor. This mixture then proceeds to the atmospheric tower, the heart of the refinery. The semi-fluids become asphalt and other derivatives while the vapors condense at various levels in the tower depending upon molecular weight. The portion of the vapor with lower molecular weight separates immediately, including kerosene and diesel. While diesel is derived from the first stage of the refining process, today’s ultra low sulfur diesel requires an extra step to remove sulfur (this step seems to be an excuse to raise the price). Vapors with higher molecular weight must go through an additional process to further crack – or separate – the oil into a greater variety of components or fractions as they are called. Lubricating oils – the fractions with which we are particularly concerned – are made from these latter, heavier fractions of the crude remaining after the gas oils have been removed. (Of note, recently refineries have developed methods to effectively use the heavier lubricating oil fractions for making gasoline. This competition for the portion of crude oil that previously was only usable for lubricating oils is one of the reasons for the rapid rise in the cost of petroleum lubricating oils.)

Crude oils from different regions of the world can be different with some being naphthenic and paraffinic. The paraffinic are much better feed stock for lubricating oils. Naphthenic oils contain no wax and are superior in cold flow applications. All crude oils contain roughly the same mix of hydrogen and carbon: 83 to 87 percent carbon and 11 to 14 percent hydrogen. Oxygen, nitrogen and sulfur round out the elements, with various metallic compounds also trapped in the oil. When dealing with lubrication qualities, it is important to consider the variation of molecular structure – from one molecule to the next – within the same sample of crude. Paraffinic molecules come in various carbon and hydrogen combinations to be sure, but to grasp the near-infinite molecular arrangements, consider a typical oil molecule of 25 carbon and 52 hydrogen atoms: this compound can occur naturally in any of 37,000,000 different molecular arrangements.

Crude oil refining is not a static industry and improvements resulting in the production of better quality lubricating oils certainly occur. Refineries are using improved techniques to separate and remove asphalt and wax by tighter cuts of molecular weight. The most significant improvement is the innovation of hydro-treating, which can produce pure base oils with all contaminants removed, a move toward the ultimate goal of producing a pure hydrocarbon product absent of the impurities found in the original crude.

Increased friction results from the distribution of the irregularly shaped hydrocarbon molecules that comprise petroleum-based lubricating oils. The uniform nature of synthetic molecules reduces friction relative to petroleum oil molecules.

Synthetic Oil Classifications

I said it would be a brief explanation of crude oil refining and I stuck to my word. Now it’s time to give a brief explanation of synthetic base oils and then take a look at the quality groupings. Again, this very brief fundamental understanding of the differences in petroleum and synthetic oils will serve you well in any and all discussions on finished oil products.

Synthetics have historically been defined as oils that synthesize light weight molecules to form heavy weight lubricating molecules. This definition is certainly true, but some variation has been allowed to include modifying the original molecular structure. The chemists are continually perfecting the design and production of various synthetic molecules, but the goal is always to produce the best design for the intended application. You can see this in the origin of synthetic oils by Standard Oil in the 1930s. These first synthetics were intended specifically for problematic lubrication applications. It was not until World War II, when the Germans found themselves with little petroleum that large scale production of synthetic lubricating oils began. By the end of the war the advent of jet engines required the first true large scale practical application of synthetic oils. Jet engines require oils capable of lubricating at minus 50ºF and up to 400ºF, a task simply beyond any petroleum oil parameters.

Synthetics come in several different chemical compounds. I will only address those used for automotive and truck applications (there are several for industrial and specialty applications). Alkylated Aromatics, Esters, Polyalphaolefins (PAO) and Hydrocracked Petroleum make up the vast majority of synthetics used in auto and truck applications, so let’s take a brief look at each.

Alkylated Aromatics

These are synthetic hydrocarbons that are compatible with mineral oils and used for industrial applications such as compressor and hydraulic oils.

Esters

I have purposely grouped the esters for simplification and am only addressing the common characteristics, not the separate individual properties. Esters have very high viscosity index (VI) ratings and excellent low temperature fluidity. Additionally, esters have good lubricating properties and excellent thermal and oxidation stability. One double edged sword for esters is the exceptional solvency and detergency that makes them super cleaning agents. It is important to recognize the cleaning capabilities of esters and use them prudently. Esters can be manufactured in a variety of geometric shapes and molecular structures and it is critical to use the correct esters for the intended application. Esters are not uniformly compatible with all seals, paints or varnish finishes.

Polyalphaolefins (PAO)

PAOs are synthetic hydrocarbons that are compatible with mineral oils; they exhibit a very high viscosity index and very low temperature fluidity. PAOs are used in virtually every sector of lubrication from automotive to industrial. PAOs are compatible with seals and paints in the same way that mineral oils are compatible. Esters are blended with PAOs for superior base oils for high temperature gear and bearing oils.

Hydrocracked (Synthetic)

These are natural hydrocarbons processed by hydro-treating/hydro-cracking to produce a pure base oil, absent of any impurities. This process de-polarizes and modifies the natural petroleum and thus qualifies the oil as synthetic by virtue of the molecular modifications.

So there is my brief description of synthetic base oils. All oils, both mineral and synthetic are placed in groups to indicate the classification (Table A).

API BASE OIL CLASSIFICATION GROUPS (Table A)

As you can see in Table A, the groups are based on oil purity and viscosity index. Saturates relates to the oxidation stability of the oil and Sulfur represents the percent of sulfur in solution. Although PAOs only have to be greater than 120 for viscosity index, 135 is common. Esters will usually have a viscosity index of greater than 140 and both esters and PAOs are free of sulfur. Oil base stock quality is based on many factors in addition to the classifications listed in this table, but the groupings in this table are referred to throughout the industry. For instance, hydrocracked synthetic is typically referred to as a Group III synthetic whereas PAOs are referred to as Group IV synthetic.

Summary

So, in this and the previous two installments of Lube Notes, we have looked at:

• What lubricating oils accomplish in their various applications
• The functions of the different additives that are combined with base stocks in order to meet the requirements of the intended applications
• The origin of petroleum base stocks and their composition contrasted to synthetic lubricating oils

Next time, we will mix up a quart of oil in order to better understand how combining base stocks and additives affects the finished product as well as what the need for additives reveals about a given product’s quality.